Home > Products > Rexroth Cylinders > Rexroth Hydraulic Cylinders

Rexroth Hydraulic Cylinders

Rexroth Hydraulic Cylinders

Rexroth  Hydraulic Cylinders Descriptions:
Rexroth offers you a well structured and systematically engineered range of hydraulic cylinders geared to your application requirements. Our cylinders line conforms to NFPA, ISO, and DIN standards and is 100% tested to Rexroth standards.
Features:
Leak-free fluid connection ports provided by standard SAE o-ring straight thread ports
Reduced wear and long service life obtained by a one piece extra long bearing made of ductile iron with tighter tolerances
Increased performance and less "down time" with advanced wear resistant sealing system
Piston rod threads available in both male and female versions. Studded rod ends standard up to 1-3/8" dia.
Extended seal life and lower susceptibility to damage with case hardened and chrome plated piston rod
Added strength and corrosion resistance with high tensile steel tie rods with rolled threads
Accurate deceleration control through patented Exact-a-justâ„¢ ultra sensitive cushioning
Patented secured air-bleed standard on both ends
Piston / rod separation eliminated by mechanically securing the piston to the piston rod
Seal extrusion and tube seal leakage eliminated by precise centering of the tube to the head end cap.
More information,please contact us.

Rexroth NFPA Hydraulic Cylinders

Rexroth NFPA Hydraulic Cylinders


Rexroth NFPA Hydraulic Cylinders Technical Data: Standards: Meets or exceeds JIC and NFPA Stan

Rexroth Hydraulic cylinder
Types CDH2 and CGH2

Rexroth Hydraulic cylinder Types CDH2 and CGH2


Rexroth Hydraulic cylinder Types CDH2 and CGH2 Descriptions:Series 1XNominal pressure 250 bar (25 MPa)Rexroth Hydraulic cylinder Types CDH2 and CGH2 Features:– Standards: DIN 24 333, ISO 6022 DETOP RP 73 H, VW 39 D 921– 6 mounting styles– Piston Ø: 50 to 320 mm– Piston
Rexroth Hydraulic cylinders Series CD210/CG210

Rexroth Hydraulic cylinders Series CD210/CG210


Rexroth Hydraulic cylinders Series CD210/CG210 Features:– Service-friendly modular construction kit system, mounting of head and cap according to the tie rod principle– Operating pressure up to max. 210 bar– 16 mounting types– Piston Ø: 40 to 200 mm– Piston rod
Rexroth Large Bore Hydraulic Cylinders

Rexroth Large Bore Hydraulic Cylinders


Rexroth Large Bore Hydraulic Cylinders Descriptions:Large BoreNPFA Industrial TypeKey Features: Nominal pressure: 3,000 psi Non shock rating: 5,000 psi Bore size: 10" - 14" Piston rod size: 4.5" - 10"For further information,please contact us.
Rexroth Linear Positioning Hydraulic Cylinder CST4

Rexroth Linear Positioning Hydraulic Cylinder CST4


Rexroth Linear Positioning Hydraulic Cylinder CST4 Descriptions:Linear Positioning Hydraulic CylinderSeries 1XNominal pressure: 3000 psiNon shock rating: 5000 psiStandards: Meets or exceeds all JIC and NFPA requirementsInstallation position: variousPressure fluid:Mineral oils (HL, HLP)Phosphate este
Rexroth Hydraulic Cylinder NFPA Industrial Type CDT4

Rexroth Hydraulic Cylinder NFPA Industrial Type CDT4


Rexroth Hydraulic Cylinder NFPA Industrial Type CDT4 Specifications:Hydraulic Cylinder NFPA Industrial TypeSeries 1XNominal pressure: 3000Non shock rating: 5000 psiStandards: Meets or exceeds all JIC and NFPA requirementsBore Sizes: 1-1/2" - 6"Piston Rods: 5/8" - 3"Mountings: 12 standard NPFA mounti
Rexroth Hydraulic Cylinder NFPA Industrial Type CDT3

Rexroth Hydraulic Cylinder NFPA Industrial Type CDT3


Rexroth Hydraulic Cylinder NFPA Industrial Type CDT3 Specifications:Hydraulic CylinderSeries 1XNominal pressure: 160 bar (16 MPa)ISO 6020/2, DIN 24 554, NF E 48-016Maximum operating pressure up to 210 barTen mounting typesPiston Ø: 25 to 100 mmPiston Rod Ø: 12 to 70 mmStroke lengths up to 1.5
Rexroth Hydraulic Cylinder NFPA Industrial Type CDT1

Rexroth Hydraulic Cylinder NFPA Industrial Type CDT1


Rexroth Hydraulic Cylinder NFPA Industrial Type CDT1 Descriptions:Hydraulic Cylinder NFPA Industrial TypeSeries 1XNominal pressure: 1500 psiDuty: Up to 1,500 psiStandards: Meets or exceeds all JIC and NFPA requirementsBore Sizes: 1-1/2" - 2-1/2"Piston Rods: 1/2" - 4Technical DataMountings: 9 standar
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1328.1 ms